The CrinEar Reference is the next step after the CrinEar Daybreak, but it is aimed at a different listener. Where Daybreak earned its following by being balanced, accessible, and easy to recommend, the Reference takes a more exacting approach. At $349.99, it is built around a neutrality-first target for listeners who want tonal accuracy, mix translation, and a more monitor-like presentation from an in-ear.

This is not a “Reference” in name only. CrinEar built it around a deliberately objective tuning target, then refined it so it still sounds believable in practice. The goal is simple: preserve the honesty and linearity you want from a real monitoring tool, while keeping enough physicality in the low end for music to sound complete and lifelike.

CrinEar Reference: We Have Arrived - Written review by Listener

CrinEar Reference: Nothing To Prove - Written review by FC-Construct

CrinEar Reference vs CrinEar Daybreak

The easiest way to understand the Reference is to place it next to the Daybreak. Daybreak was the broader all-rounder, the model that made Crinacle’s tuning philosophy easy to access at a lower price. The Reference moves upmarket and narrows the mission. It is the more specialized model, tuned for neutrality, consistency, and critical listening rather than broad crowd-pleasing warmth or extra excitement.

That does not make it sterile. It makes it focused. If Daybreak was designed to be easy to love, the Reference is designed to be easy to trust. For listeners who want an IEM that tells them what is in the recording rather than flattering it, that is the real appeal.

What the Measurements Suggest

The B&K 5128 measurements back up that goal. The CrinEar Reference tracks a very even overall slope from bass to treble, with both the short tips and standard tips landing in a range that should read as neutral to neutral-warm for most listeners. In practical terms, that points to an IEM with balanced bass, mids, and treble rather than one that leans obviously bright, thin, or bass-heavy.

CrinEar Reference In-Ear Headphones Frequency response graph on b&K 5128 measurement system with standard tips

CrinEar Reference In-Ear Headphones Frequency response graph on b&K 5128 measurement system with short tips

CrinEar Reference frequency response measurement on b&k 5128 measurement system with short tips

*This shows the CrinEar Reference measurements for each set of tips done on the B&K 5128. These measurements show seatings for each tip size, which change the insertion depth of the IEM and change the sound. The shaded area shows the outer range of results while the bolded center line shows the more common result, but for any individual, depending on insertion depth, the sound could be anywhere within the shaded area. The bounded field marked by solid lines on top and bottom shows the range of preferences we know to exist from the Harman research, while the dotted center line shows a tilt of 10dB from bass to treble, which aligns with typical listener preferences in both headphones and speakers.

Just as importantly, these measurements show why tip choice matters. Because insertion depth changes the sound, an individual listener may hear something anywhere within that shaded range. IEMs tend to be sensitive to related to your ears and the Reference is no different. Dialing in the right tip can meaningfully affect how neutral, warm, or direct it sounds in your ears. Tips matter!

Objective Neutrality, Refined for Real Listening

CrinEar’s stated target is a population-averaged diffuse-field response with a gentle downward tilt, then a subtle low-frequency lift to restore the sense of physicality people expect from a good speaker system or studio monitor in a real room. That is an important choice. Plenty of products chase flatness on paper. Far fewer manage to sound natural once they are actually in your ears.

Here, the bass lift is there to preserve realism, not to turn the Reference into a bass-boosted set. The end result should be familiar to anyone who values accurate monitors: controlled, even-handed, and honest, with enough foundation down low to keep the sound grounded.

Tuned for the Studio, Built for Daily Use

The Reference is designed as a genuine monitoring tool. It is meant for critical listening, mix checks, and anyone who wants reliable tonal balance without constantly having to second-guess what the IEM is adding or taking away. Midrange clarity is central to that job. If vocals, instruments, and the body of the mix are not presented with the right balance and weight, nothing works as a true reference monitor.

That is also why the bass system matters so much here. A flat target is only useful if the low end stays disciplined. The Reference is built to keep bass extension and physicality without letting it blur into the rest of the mix, which makes it more useful for long-term listening and more credible as a tool.

HODWS Architecture and 3BA Driver System

Bass is handled by a custom Horizontally-Opposed Dual Woofer System, or HODWS, using two 10 mm dynamic drivers. By splitting the mechanical load across both woofers, the system is designed to reduce stress on each diaphragm, improve bass linearity, improve efficiency, and deliver tighter, more controlled low-end response. That is a smart way to approach bass on a neutrality-first IEM, because “flat bass” still needs to sound like real bass.

For the mids and highs, the Reference uses a three balanced armature array made up of twin Sonion midrange drivers and a Knowles supertweeter. That gives the Reference a clear division of labor across the frequency range, with the dual dynamic system handling foundation and weight while the BA array focuses on articulation, presence, and upper-end detail.

Tip Choice and Fit Matter

The included tip selection is not filler. It is part of how the Reference should be used. Between the standard bore, shorter bore, widebore, and foam options, listeners have multiple ways to tune fit, insertion depth, seal, and final tonal balance. The measurements show why that matters: seating changes the response, especially as you move through the upper mids and treble.

For most people, the Reference should land somewhere between neutral and neutral-warm once properly fitted. The best approach is to treat the included tips as part of the setup process, not just accessories in the box. The right tip will not only improve comfort and seal, it will help the Reference sound closer to the way it was intended.

Built to Last, Easy to Live With

The Reference uses a full aluminum shell precision-machined with a 5-axis CNC process. The pseudo-custom shape is designed to sit securely for longer sessions while helping control enclosure resonance. It feels purposeful, which suits a product aimed at both serious enthusiasts and professional users.

CrinEar also includes a premium silver-plated copper modular cable with interchangeable 3.5 mm single-ended and 4.4 mm balanced connectors. That makes the Reference easy to move between portable dongles, DAPs, desktop gear, and more serious source chains without needing to swap cables or give up connection flexibility.

Key Features

Neutrality-first in-ear monitor designed for tonal accuracy and mix translation
Follow-up to the CrinEar Daybreak with a more specialized reference tuning
B&K 5128 measurements suggest a neutral to neutral-warm presentation for most listeners, depending on tip choice and insertion depth
Perceptually flat tuning with a subtle low-frequency lift for realism and physicality
Dual 10 mm dynamic driver HODWS bass system for tighter, more linear low-end response
Three balanced armature drivers for midrange and treble reproduction
Twin Sonion midrange drivers and one Knowles supertweeter
5-axis CNC-machined full aluminum shells
Pseudo-custom shell geometry for comfort and stability
Premium silver-plated copper modular cable included
Interchangeable 3.5 mm single-ended and 4.4 mm balanced connectors
Multiple tip styles included to optimize fit, insertion depth, and tonal balance
Leatherette zip case included

Technical Specs

Product Type	Wired in-ear headphones / in-ear monitor
Price	$349.99
Driver Configuration	2 x 10 mm dynamic drivers + 3 balanced armature drivers
Bass System	HODWS, Horizontally-Opposed Dual Woofer System
Balanced Armature Array	2 x Sonion midrange drivers + 1 x Knowles supertweeter
Impedance	16Ω @ 1 kHz
Sensitivity	104 dB/mW @ 1 kHz
Frequency Response Range	2 Hz to 44,000 Hz
Housing	5-axis CNC-machined full aluminum shell
Nozzle Width	6.0 mm lip
Cable Material	Silver-plated copper
Connectors Included	3.5 mm single-ended and 4.4 mm balanced interchangeable terminations

What’s in the Box

CrinEar Reference in-ear headphones
Silver-plated copper modular cable
3.5 mm single-ended interchangeable connector
4.4 mm balanced interchangeable connector
S/M/L standard bore silicone eartips
S/M/L shorter bore silicone eartips
XS/S/M/L widebore silicone eartips
M foam eartips
Leatherette zip case

Pre-Order Collection

Noble Audio Shogun In-Ear Headphones

Truthear Pure In-Ear Headphones

HEDD Audio HEDDphone TWO UNPLUGGED Edition

HEDD Audio HEDDphone TWO GT UNPLUGGED Edition

Audeze LCD-5s Headphones

Audeze Maxwell 2 Wireless Gaming Headphones

CrinEar Reference In-Ear Headphones

Meze Audio Astru In-Ear Headphones